IT-8350G Data sheet

IT-8350G

IT-8350G is an advanced ultra-low loss & high Tg (185° C by TMA) material for demanding Radio frequency applications. The material has a Dielectric constant of 3.5 and is designed for the emerging 4.5 G LTE and 5G applications requiring halogen free materials with stringent thermal stability with temperature and frequency requirements. The product is also designed for long range, short range and medium range Radars used for Autonomous driving or advanced driver assist systems operating in the 24 GHz range. The product offers better dissipation factor and insertion loss than fiber reinforced Hydrocarbon materials. The product can be paired with a full prepreg offering to build high reliability multilayer boards or with other ITEQ materials for Hybrid constructions.
Applications Next Generation Halogen free product for

4 G LTE Base Stations, Power amplifiers

4.5G LTE Base stations, Antennas and PAs

24 GHz Automotive radar applications

77 GHz. SRR and MRR systems

5 G Base Stations & mm wave applications

Direct Broadcast systems

Antenna applications

CPE antennas
Key Features

Very low loss ~0.0025 at 10 GHz.

Excellent dimensional stability

Very stable DK/Df with Temperature

Ability to use very low profile Copper for reduced insertion loss

Highly suitable for Hybrids, Ability to make high layer count boards

Full prepreg offering, Compatible with modified FR-4 processes
Property
Items Methods　 IT-8350G
Tg (℃) TMA 185
T-300 (w/ 1 Oz Cu, min) TMA 60+
Td-5 %( ℃) TGA 5% loss 425
CTE (ppm/℃) a1/a2 65/268
CTE (%), 50-260℃ TMA 3.8
Dk @ 10 GHz IPC TM-650 2.5.5.13 3.5
Df @ 10 GHz IPC TM-650 2.5.5.13 0.0025

If you have PCB to produce, please send Gerber to sales@pcbsky.com.cn .Thank you.

PDF Download

IT-8350G Datasheet

Comments

Post a Comment

Popular posts from this blog

What is the POFV process of PCB? Why use POFV technology?

Image
The process flow of POFV has become more and more widely used in the PCB industry in recent years, especially in some products with high layers and large board thickness, which is very popular. People hope to use resin plug holes to solve a series of problems that cannot be solved by using green oil plug holes or pressure-filled resin. However, due to the characteristics of the resin itself used in this process, many difficulties need to be overcome in manufacturing to achieve good quality resin plug products. With the continuous updating of electronic product technology, the structure and installation method of electronic chips are constantly improving and changing. Its development is basically from components with plug-in feet to highly dense integrated circuit modules using ball matrix arrangement of solder joints. You can see the development history of parts from the following figure: In the PCB industry, many process methods have been widely used in the industry, and peop...
Read more

IT-968G Data sheet rev 1.0-20

IT-968G The IT-968G is an advanced low CTE, high Tg (175° C by TMA), Halogen free and ultra low loss material. This material is designed not only for standard multilayer PWBs, but also for high speed data rate application, like the switch (100G), Base station application. IT-968G SI performance is stable with variety environment condition, it is also exhibit high thermal and CAF reliability. Application Server/Storage/Switch Backplane Telecom Base station Key Features Halogen free material 100G/400G Switch solution Advanced high Tg resin technology Lower Dk (3.59 @ 10GHz) and Ultra low Df (0.0050 @ 10GHz) Stable Dk/Df with different environment condition Compatible with modified FR-4 processes High thermal & CAF reliability Property Items Methods IT-968G Tg (℃) TMA 175 T-288 (w/ 1 Oz Cu, min) TMA >60 Td-5%(℃ ) TGA 5% loss 400 CTE (ppm/℃) a1/a2 45/260 CTE (%), 50-260℃ TMA 2.3 Dk @ 10 GHz (RC 55%) IPC TM-650 2.5.5.13 3.59 Df @ 10 GHz (RC 55%) IPC TM-650 2.5.5.13 0.0050 If you hav...
Read more

PCB Design, Manufacturing & Assembling

In this article, you'll get to know the fundamentals of PCB manufacturers and how our company "PCBSKY" is unique from other manufacturers in China. What are the three main aspects of the PCB industry?   According to our experience of more than 10 years as the leading PCB Company in the industry, we can easily write that three main aspects in the PCB industry for which most clients look for are: PCB Design PCB Manufacturing  PCB Assembly Design, Manufacturing, and assembling of PCB is a systematic method for examining the parts and components which is needed to execute. It included obtaining costs of a commodity and seeks to cut costs before actual development begins. There are specific manufacturing, design, and assembling principles required to be following during the PCB process execution of any electrical or electronics part. Eventually, a final design concludes the series with a review among the most common issues related to the PC Board or Printed Circuit Board....
Read more