Metal-based Printed Circuit Board Introduction

The custom MCPCB, also known as the MCPCB aluminum substrate, is composed of a circuit layer (copper foil layer), a thermally conductive insulating layer, and a metal base layer. It attaches the original printed circuit board to another metal with better heat conduction effect, which can improve the heat dissipation at the board level. It is commonly used in the LED industry.

For example, LED light source boards use custom MCPCB. LEDs are representative of the current mainstream lighting equipment and display fields, and metal-based printed circuit boards are the founders of this light source industry. Although the metal-based printed circuit board improves heat dissipation, it does not mean that it can withstand high temperatures, so the temperature requirement during the manufacturing process must not exceed 250 ° C ∼ 300 ° C. Therefore, when the tin furnace is used, the temperature must be controlled, otherwise the metal printed circuit board may be scrapped.

LED flashlights and LED light-panel substrates commonly used in life are basically made of custom metal core printed circuit boards. The LED light strip is not counted, and the FPC flexible circuit board may be used, which is usually used for cable.

Therefore, the probability of using these two boards in the LED industry is relatively common.

Comments

Post a Comment

Popular posts from this blog

PCB Design, Manufacturing & Assembling

In this article, you'll get to know the fundamentals of PCB manufacturers and how our company "PCBSKY" is unique from other manufacturers in China. What are the three main aspects of the PCB industry?   According to our experience of more than 10 years as the leading PCB Company in the industry, we can easily write that three main aspects in the PCB industry for which most clients look for are: PCB Design PCB Manufacturing  PCB Assembly Design, Manufacturing, and assembling of PCB is a systematic method for examining the parts and components which is needed to execute. It included obtaining costs of a commodity and seeks to cut costs before actual development begins. There are specific manufacturing, design, and assembling principles required to be following during the PCB process execution of any electrical or electronics part. Eventually, a final design concludes the series with a review among the most common issues related to the PC Board or Printed Circuit Board.
Read more

What is the POFV process of PCB? Why use POFV technology?

Image
The process flow of POFV has become more and more widely used in the PCB industry in recent years, especially in some products with high layers and large board thickness, which is very popular. People hope to use resin plug holes to solve a series of problems that cannot be solved by using green oil plug holes or pressure-filled resin. However, due to the characteristics of the resin itself used in this process, many difficulties need to be overcome in manufacturing to achieve good quality resin plug products. With the continuous updating of electronic product technology, the structure and installation method of electronic chips are constantly improving and changing. Its development is basically from components with plug-in feet to highly dense integrated circuit modules using ball matrix arrangement of solder joints. You can see the development history of parts from the following figure: In the PCB industry, many process methods have been widely used in the industry, and peop
Read more

IT-968G Data sheet rev 1.0-20

IT-968G The IT-968G is an advanced low CTE, high Tg (175° C by TMA), Halogen free and ultra low loss material. This material is designed not only for standard multilayer PWBs, but also for high speed data rate application, like the switch (100G), Base station application. IT-968G SI performance is stable with variety environment condition, it is also exhibit high thermal and CAF reliability. Application Server/Storage/Switch Backplane Telecom Base station Key Features Halogen free material 100G/400G Switch solution Advanced high Tg resin technology Lower Dk (3.59 @ 10GHz) and Ultra low Df (0.0050 @ 10GHz) Stable Dk/Df with different environment condition Compatible with modified FR-4 processes High thermal & CAF reliability Property Items Methods IT-968G Tg (℃) TMA 175 T-288 (w/ 1 Oz Cu, min) TMA >60 Td-5%(℃ ) TGA 5% loss 400 CTE (ppm/℃) a1/a2 45/260 CTE (%), 50-260℃ TMA 2.3 Dk @ 10 GHz (RC 55%) IPC TM-650 2.5.5.13 3.59 Df @ 10 GHz (RC 55%) IPC TM-650 2.5.5.13 0.0050 If you hav
Read more