What is ENIG Plating?

 ENIG (Electroless Nickel Immersion Gold) is a surface plating that is applied over the copper pads on a Printed Circuit Board to protect them from corrosion and other abnormalities. Initially, the copper pad is covered by a Nickel (Ni) layer followed by a thin immersion Gold (Au) layer. ENIG provides good oxidation resistance, excellent surface planarity and allows for easy soldering which results in excellent electrical performance of the PCB board.

ENIG is RoHS compliant is therefore one of the most used PCB surface finishes even though it is more complex and expensive when compared to other PCB plating process like HASL.

ENIG is a two-layer metallic coating – Nickle is the barrier to the copper pad and is also the materials to which the components are soldered. Gold on the other hand protects the Nickle during storage and also provides low contact resistance. Typical Nickle thickness varies from 4 – 7 µm and Gold thickness varies from 0.05 – 0 23 µm. ENIG requires a processing temperature of around 80 °C.

Advantages of ENIG Surface Finishes:

It provides impressive wettability, surface planarity, coplanarity, and long shelf life (up to 12 months) to the PCB board since immersion gold has strong chemical properties. 

In ENIG, the nickel layer acts as a barrier and stops the interfusion between gold and copper. It also produces an intermetallic compound (IMC) Ni3Sn4 to provide good solderability after reacting with Tin.

It has low contact resistance, high strength, reduces oxidation, and provides antifriction. Overall, it enhances circuit conductivity requirements.

It provides good plating over the copper pads and via holes.

Its excellent surface planarity allows the components to be soldered flat onto the pad, making it ideal for BGA pads and other fine-pitch components.

ENIG complies with all RoHS requirements.

Limitations of ENIG Surface Finishes:

ENIG is an expensive surface finish technology

It has undesirable magnetic properties

Not good for rework and makes PCB repair very difficult

Comments

Popular posts from this blog

ROGERS rt duroid 6010 PCB

rogers RT duroid 5880 PCB

What is the POFV process of PCB? Why use POFV technology?