Posts

Showing posts with the label Double sided flexible PCB

Open material manufacturing process of double sided flexible PCB

Except for some materials, materials used in  double sided flexible PCB  are basically rolled. As not all processes must be processed by the tape winding process, some processes must be cut into sheets before processing. For example, the drilling of metallization holes of double sided flexible PCB can only be carried out in the form of sheets at present, so the first process of double sided flexible PCB is to open materials.  Flexible copper foil laminate to bear the external force is very poor, it is easy to be injured. If the material is damaged in the opening will have a serious impact on the passing rate of the subsequent processes. Therefore, in order to ensure the quality of materials, even if it seems to be very simple, enough attention must be paid. If the amount is less, you can use manual shears or hob cutters, large quantities, you can use automatic shears. Whether it is single-sided or double-sided copper foil laminate or covering film, the precision of openin...

The problems we need to pay attention to in double sided flexible circuit board screen printing

1.  Double sided flexible PCB  upper line screen printing First we need to select materials, baking pretreatment, in order to prevent the contraction of the material deformation to the process after the trouble.  2. The diameter of blanking carbon hole for double sided flexible PCB The blanking carbon hole is generally 0. 8 to 1. 0 m m. Pay attention to the carbon hole must be selected properly, the hole is too large, in the screen printing lower line, through the carbon hole infiltration of carbon ink too much, excess ink will flow through the carbon hole remains in the screen printing table, easy to cause the short circuit of the line. 3. Double sided flexible PCB bottom line screen printing Take the locating hole as the datum, prints the lower layer line in the non-screen printing surface. In the process of screen printing, if the use of machine printing, the table using vacuum suction device is conducive to the flow of conductive ink, but often easy ...

Manufacturing technique of double sided flexible PCB

There are a variety forms of flexible printed circuit boards, even if it is a single sided structure, its covering film, reinforced plate material and shape, the process will change greatly. A seemingly simple single sided flexible printed circuit board may have more than 20 basic processes.  Double sided flexible PCB  has two conductive layers, which can obtain higher package density. Double sided flexible PCB is widely used in disk drives.  Double flexible PCB and flexible manufacturing method of the single panel there is a big difference, as shown in the following is ordinary have reinforced plate hole metallization double the gm of flexible printed circuit board manufacturing process: Cutting a drill guide hole, hole metallization cleaning a resist coating on the surface of the copper foil a formation of conductive graphics etching, resist stripping a covering film of a terminal plating surface shape and hole machining a reinforced plate processing, check the packagin...